: These black lime green golf cart seat covers will only fit Front & Rear Seats of EZGO FREEDOM TXT 2014+, Valor gas & electric golf carts. : If you have aftermarket front seat, modified front seat, A two-piece lean back or Executive Deluxe Seats, our seat covers may NOT fit. Please check with us before purchasing. The Rear Seat lean back sizes need to be 35?? x 12?? and the rear seat bottom sizes need to be 37.5?? x 14??. Otherwise, they may not fit.
: Replace your worn and torn old seat cover with Huskey’s golf cart seat cover to give your cart a complete new and upgraded look.
: These seat covers have 1/2 extra foam padding to give you a more cushioned ride. In addition, our insert panels are stitched providing a higher quality look and feel. We use piping on exterior panels, giving your cart a luxurious look. We use high quality treated with UV inhibitors which ensures our seat covers will not fade over time. The material we use is also guaranteed not to crack in cold weather.
: Golf Cart Seat covers are designed to be stapled over the original seats. We include step by step installation instructions in the package.
: is confident about its products and ensures high quality so we provide a 1-year warranty to our products. Please feel free to contact us if you have any questions before /after purchasing.

FOR EZGO FREEDOM TXT 2014+, Valor Models: The serial number and manufacturer’s number can be found on a plate located in the glove box on the passenger’s side of the vehicle. The serial number is either six or seven numbers and does not indicate the model year. The manufacturer’s number does reflect the model year. This series will have one letter and three or four numbers which will include two numbers indicating the last two digits of the year it was manufactured. Newer EZ-GO carts have the words “TXT”, “Freedom TXT”, “RXV” or “Freedom RXV” listed on the side of the cart, located vertically beneath the armrests. Once you have the serial number, then enter your serial number into the top left search box on the EZGO website to verify the make and model of your cart!
:
1x Front Lean Back Cover (Will not fit two pieces seat back)1x Front Seat Bottom Cover1x Rear Seat Lean Back Cover (will fit most rear seats in the market) Approx. Seat Back size: 35″x12″1x Rear Seat Bottom Cover (will fit most seats in the market) Approx. Seat Bottom Size: 37.5″x14″

Golf cart seat cushions take a lot of abuse, as passengers continually get in and out of your golf cart. Cracks and tears may begin to occur with extended use and that is the perfect time to change your seat covers.

STAPLE -ON SEAT COVER SET
:
Remove the seat from the cart.Remove arms and hinges.Center new seat cover over old, pulling corners evenly.Snug up seat cover and temporarily tack or staple into place.Check for proper fit before proceeding, making adjustments as necessary.Staple permanently.
:
Remove back cap if it has one. Center new seat cover over old, pulling corners evenly.With the back cover properly fitted, temporarily staple along the bottom of back rest.Some models have a dip in the top of the backrest, so you will need to make relief cuts in the fabric. (Be careful not to cut too deep)Pull fabric until it conforms to this dipped area and staple into place. More cuts may be needed. Be careful not to rip the fabric at buts when pulling.Staple permanently.
BE SURE TO STAPLE ALL SEAMS BEFORE TRIMMING
DO NOT USE BLEACH